Smart Search 



Title of the article The experimental evaluation of cutting ability with modified by ECoDM strips work surface
Authors

Kiselev M.G., Doctor of Technical Sciences, Professor, Head of the Department "Design and manufacture of devices", Belarusian National Technical University, Minsk, Republic of Belarus

Drozdov A.V., Candidate of Technical Science, Assistant Professor of the Department "Design and manufacture of devices", Belarusian National Technical University, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

Gabets V.L., Candidate of Technical Science, Assistant Professor of the Department "Design and manufacture of devices", Belarusian National Technical University, Minsk, Republic of Belarus

Bohdan P.S., Master's Student of the Instrumentation Engineering Faculty, Belarusian National Technical University, Minsk, Republic of Belarus

In the section TECHNOLOGICAL MECHANICS
Year 2014 Issue 3 Pages 64-68
Type of article RAR Index UDK 621.9.048.2 Index BBK  
Abstract

Article is devoted to the experimental evaluation of cutting ability with modified by ECoDM strips work surface. The article shown that making the cutting ability of surface provided by forming thereon during ECoDM recesses (holes) with the edges of the solidified metal nodules. Found that the height of the sag determined by the capacitance of the storage capacitor and the voltage on it, which increases with increasing it. Experimentally proved that these structural elements are capable of shooting chips when cutting materials whose hardness is lower than the hardness of the steel strips. The experimental results, reflecting the influence of height on working surface sagging strips on the intensity of cutting its range of materials. Proceeding from the peculiarities of the process of sawing materials such tool, developed recommendations for the practical use of the research results.

Keywords wire cutting, strips cutting, ECoDM, cutting instrument, cutting ability
  You can access full text version of the article
Bibliography
  • Kiselev M.G. [et al.]. Modifikacija ishodnoj poverhnosti provolochnogo instrumenta s cel'ju pridanija ej rezhushhej sposobnosti putem primenenija jelektrokontaktnoj obrabotki [Modification of the original surface of the wire tool with the aim of giving it cutting ability by applying electric-processing]. Vestn. Belorus.-Ros. un-ta [Reporter of the Belarusian-Russian University], 2012, no. 1(34). 
  • Kiselev M.G. [et al.]. Vlijanie sposoba vypolnenija jelektrokontaktnoj obrabotki ishodnoj poverhnosti provolochnogo instrumenta na ego rezhushhuju sposobnost' [The impact of the method of electric-processing of an original surface of a wire tool on its cutting ability]. Materialy, tehnologii, instrument [Materials, technologies, tools], 2012, no. 4(17). 
  • Kiselev M.G. [et al.]. Vlijanie rezhimov jelektrokontaktnoj obrabotki ishodnoj poverhnosti provolochnogo instrumenta na velichinu sil rezanija v processe raspilivanija im materialov bez ispol'zovanija abrazivnoj suspenzii [Effect of electric-processing of an original surface of a wire tool on cutting forces during cutting of materials without use of abrasive slurry]. Vestn. Belorus.-Ros. un-ta [Reporter of the Belarusian-Russian University], 2014, no. 1(42). 
  • Mickevich M.K. [et al.]. Jelektrojerozionnaja obrabotka metallov [Electroerosion machining of metals]. Minsk, Nauka i tehnika Publ., 1988. 216 p. 
  • Artamonov B.A. [et al.]. Jelektrofizicheskie i jelektrohimicheskie metody obrabotki materialov [Electrophysical and electrochemical methods of processing materials]. T. 1: Obrabotka materialov s primeneniem instrumenta [Material processing using a tool], Moscow, Vyssh. shk. Publ., 1983. 247 p.