Smart Search 



Title of the article

MODIFIED IN VOLUME WITH TITANIUM CARBIDE OXIDE-CERAMIC COATING ON THE EUTECTIC SILUMIN: PREPARATION, STRUCTURAL-PHASE STATE, PROPERTIES

Authors

KOMAROV Alexandr I., Cand. Techn. Sc., Head of the Sector of the Laboratory of Metallurgy in Mechanical Engineering, Joint Institute of Mechanical Engineering of the National Academy of Sciences of Belarus, Minsk, The Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

In the section TECHNOLOGICAL MECHANICS
Year 2016 Issue 1 Pages 68-74
Type of article RAR Index UDK 621.794.61:669.715 Index BBK  
Abstract

The article presents the results of volumetric modification with synthesized nanoscale titanium carbide of the ceramic coatings obtained on eutectic silumin in the process of micro-arc oxidation. A significant effect of TiC, injected at various concentrations into the electrolyte to the structure and tribomechanical properties of the coatings has been found. This is primarily expressed in the increased (at least 3 times) content of corundum in the coating, which leads to an increase in wear resistance of 2-fold while the coefficient of friction decreased by 1,3 times.

Keywords

carbide corundum composition, oxide-ceramic coating, microarc oxidation

  You can access full text version of the article.
Bibliography
  • Vityaz P.A., Zhornik V.I., Ilyushchenko A.F., Senyut V.T., Komarov A.I., Korzhenevskiy A.P., Ivakhnik A.V. Nanoalmazy detonacionnogo sinteza: poluchenie i primenenie [Nanodiamonds of detonation synthesis: preparation and application]. Minsk, Belaruskaya navuka, 2013. 381 p.
  • Komarov A.I., Komarova V.I. Sozdanie iznosostoykikh uprochnyayuschikh pokrytiy mikrodugovym oksidirovaniem, neposredstvennoy i posleduyuschey modifikaciey uglerodnymi nanomaterialami [Creating wear-resistant hardening coatings by microarc oxidation, with direct and subsequent modification of carbon nanomaterials]. Perspektivnye tekhnologii [Advanced technologies]. Vitebsk, UO “VGTU”, 2011, part 6, pp. 114–148.
  • Vityaz P.A., Zhornik V.I., Komarov A.I., Komarova V.I., Korzhenevskiy A.P. Elektrolit dlya mikrodugovogo oksidirovania aluminia i ego splavov [The electrolyte for micro-arc oxidation of aluminum and its alloys]. Patent BY, no. a 20020116.
  • Vityaz P.A., Komarov A.I., Komarova V.I. Intensificiruyuschee vozdeystvie uglerodnykh nanochastic na formirovanie mikrodugovykh pokrytiy na splavakh aluminiya [Intensifying the impact of carbon nanoparticles to form microarc coatings on aluminum alloys]. Korroziya: materialy, zaschita [Corrosion: materials, protection], 2011, no. 5, pp. 42–46.
  • Vityaz P.A., Komarov A.I., Komarova V.I. Rol nanougleroda v formirovanii struktury i svoystv mikrodugovykh keramicheskikh pokrytiy na splavakh aluminiya [The role of nanocarbon in determining the structure and properties of microarc ceramic coatings on aluminum alloys]. Doklady nacionalnoy akademii nauk Belarusi [Reports of the National Academy of Sciences of Belarus], 2013, no. 5, pp. 96–101.
  • Rud A.D., Ivashchuk L.I., Kuskova N.I., Zelinskaya G.M., Uvarov V.N., Melnichuk E.E. Struktura amorfnogo ugleroda, poluchennogo metodom elektricheskogo proboya uglevodorodnykh zhidkostey [The structure of amorphous carbon produced by electrical breakdown of hydrocarbon liquids]. Izvestiya vuzov. Khimiya i khimicheskaya tekhnologiya [Proceedings of the universities. Chemistry and chemical technology], 2010 vol. 53, no. 10, pp. 38–43.
  • Vityaz P.A., Komarov A.I., Komarova V.I., Zhukov B.G., Sedov A.I., Ponyaev S.A. Rol fullerensoderzhaschikh sash v strukturoobrazovanii MDO-pokrytiy [The role of the fullerene soot in the structure formation of MAO coatings]. Nanostruktury v kondensirovannykh sredakh [Coll. of scientific articles. Nanostructures in Condensed Matter]. Minsk, A.V. Lykov Institute of Heat and Mass Transfer, 2014, pp. 3–12.
  • Samsonov G.V., Vinnitskiy I.M. Tugoplavkie soedineniya: Spravochnik [Refractory compounds: Reference]. Moscow, Metallurgiya, 1976. 560 p.
  • Matrenin S.V., Slosman A.I. Technicheskaya keramika: Uchebnoe posobie [Technical ceramics: Textbook]. Tomsk, Publishing house TPU, 2004. 75 p.
  • Komarov A.I., Komarova V.I. Osobennosti triboformirovaniya poverhnostnyh sloev MDOpokrytiya pod vozdeistviem karbida i nitrida titana [Features of triboformation of the surface layers of the MAO coating under the influence of carbide and titanium nitride]. Collection of Materials “Perspektivnye materialy i technologii” [Advanced materials and technologies]. Vitebsk, UO “VSTU”, 2015, pp. 61–64.
  • Gordienko P.S., Dostovalov V.A., Zhevtun I.G., Kharchenko W.V., Barinov N.N., Kaydalova T.A., Dostovalov D.V. Formirovanie karbidnykh faz na katodnopolyarizovannoy poverkhosti titana [Formation of carbide phases in the cathode-polarized titanium surface]. Korroziya: materialy, zaschita [Corrosion: materials, protection], 2009, no. 7, pp. 1–5.
  • Digonskiy S.V. Gazofaznye processy sinteza i spekaniya tugoplavkikh veschestv [The gas-phase processes of synthesis and sintering of refractory materials]. Moscow, Geos., 2013. 462 p.
  • Sirkin V.G. CVD-metod. Khimicheskoe parofaznoe osazhdenie. [CVD-method. Chemical vapor deposition]. Moscow, Nauka, 2000. 496 p.
  • Fedorov V.A., Velikoselskaya N.D. Fiziko-mekhanicheskie kharakteristiki uprochnennogo poverkhnostnogo sloya na splavakh aluminiya, poluchaemogo pri mikrodugovom oksidirovanii. [Physical and mechanical characteristics of the hardened surface layer on aluminum alloys produced at microarc oxidation]. Fizika i khimiya obrabotki materialov [Physics and chemistry of materials processing], 1990, no. 4, pp. 57–62.