Smart Search 

Authors Bakovskii A., Ph.D. in Technical Sciences, Graduate Student of the Sventokzhinskoy polytechnics, Kielce, Republic of Poland

Radishevskii L., Doctor of Technical Sciences, Professor of the Sventokzhinskoy polytechnics, Kielce, Republic of Poland

Iaroshevich E., Doctor of Technical Sciences, Professor, Deputy Dean of the Faculty of Management of the Bialystok University of Technology, Bialystok, Republic of Poland

Year 2014 Issue 3 Pages 22-26
Type of article RAR Index UDK 621.42 Index BBK  
Abstract An analytical-experimental model has been proposed to determine sac volume pressure changes and fuel doses injected into the diesel cylinders. The model takes into account friction forces and the mechanical properties have been identified. Engine performance results have been analysed statistically. The results of the Lilliefors, Pearson, Shapiro-Wilk and Jarque-Bera tests have provided evidence to reject, under certain engine operating conditions, the hypothesis about the compatibility of the measurement data with the normal distribution. Measurement uncertainty for the injector needle lift has been estimated. The difference between the measured and predicted fuel dose values have amounted to approximately 3 %.
Keywords injector, modelling, fuel expense, uncertainty of measurement
  You can access full text version of the article
  • Bakowski A. Metrological analyses of diesel engine indicated signals: PhD thesis (in Polish). Kielce, University of Technology, 2013.
  • Bаkowski A., Radziszewski L. Identifying the mechanical properties of the fuel injector of an internal combustion engine in Problems of maintenance of sustainable technological systems. Automotive engineering and vehicle safety engineering. Kielce, 2012, vol. IV, pp. 22-37.
  • Dongiovanni C., Coppo M. Accurate Modelling of an Injector for Common Rail Systems. In Fuel Injection, 2010. DOI: 10.5772/55402.
  • Filipovic I., Pikula B., Bibic D. Influence of geometric and hydro-dynamic parameters of injector on calculation of spray characteristics of diesel engine. Thermal science, 2011, no. 15, 4, pp. 1095-1109.
  • Gu F., Ball A. Diesel injector dynamic modelling and estimation of injection parameters from impact response. Part 1: Modelling and analysis of injector impacts. Proceedings of the Institution of Mechanical Engineers. Part D: Journal of Automobile Engineering, 1996, 210(44), pp. 293-302.
  • Guide to the expression of uncertainty in measurement. Switzerland, 1995.
  • Hlavna V. Hydrodynamics of the injection equipment. PTNSS-2011-SC-197.
  • Idzior M. A Study of compression ignition engine injector nozzle parameters in the aspect of their operating properties. Rozprawy, no. 384, Poznan University of Technology, 2004 (in Polish).
  • Kurczyсski D. The effect of biofuels and their blends with diesel on operations parameters in self-ignition engine: PhD thesis (in Polish). Kielce, Kielce University of Technology, 2007.
  • Litak G., Longwic R. Analysis of Repeatability of Diesel Engine Acceleration. Applied Thermal Engineering, 2009, doi: 10.1016/j.applthermaleng.2009.06.015.