Smart Search 

Title of the article



Ishin N.N., Candidate of Technical Sciences, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus

Goman A.M., Candidate of Technical Sciences, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.

Skorohodov A.S., Candidate of Technical Sciences, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus

Year 2010 Issue 4 Pages



Type of article RAR Index UDK 621.833 Index BBK  

Results of experimental research of gearing resonance modes are considered. Serial specimens used in machine building were tested at universal stand of the open force contour. The resonance phenomena in gearing, accompanied disconnection of teeth and sharp increment of the dynamic loading in a toothed engagement, have been fixed at frequency of rotation of gear in two times less values of rotation frequency, according for main resonance. Signs of resonance observed also on frequencies, equal 1/3 and 1/4 values of main resonance.


gear, resonant mode, bench tests, dynamic load, overlap factor

  • Ishin N.N., Goman A.M., Skorohodov A.S. Rezonansnye rezhimy zubchatyh peredach. Chast' I: analiticheskij raschet rezonansnyh chastot [Resonance conditions of gearings. Part I: Analytical calculation of resonance frequencies]. Mehanika mashin, mehanizmov i materialov [Mechanics of machines, mechanisms and materials], 2010, no. 3(12), pp. 33-39.
  • Petrusevich A.I., Genkin M.D., Grinkevich V.K. Dinamicheskie nagruzki v zubchatyh peredachah s prjamozubymi kolesami [Dynamic loads in tooth gears with spur wheels]. Moscow, Izd-vo AN SSSR, 19-6. 132 p.
  • Genkin M.D., Ajrapetov Je.L. eds. Vibracii mehanizmov s zubchatymi peredachami [Vibration machines with gears transmissions]. Moscow, Nauka, 1978. 127 p.
  • Berestnev O.V., Goman A.M., Ishin N.N. Analiticheskie metody mehaniki v dinamike privodov [Analytical methods of mechanics in dynamics of drives]. Minsk, Navuka i tjehnika, 1992. 238 p.
  • Berestnev O.V. Samoustanavlivajushhiesja zubchatye kolesa [Aligning gears]. Minsk, Navuka i tjehnika, 1983. 312 p.
  • Dimentberga F.M., Kolesnikova K.S. eds. Vibracii v tehnike [Vibrations in the technique]. Moscow, Mashinostroenie, vol. 3, 1980. 544 p.
  • Berestnev O.V. [et al.]. Jeksperimental'nye issledovanija dinamicheskih nagruzok i vibroakusticheskih harakteristik peredach s samoustanavlivajushhimisja zubchatymi kolesami [Experimental study of dynamic loads and vibro-acoustic transmission characteristics with spherical gears]. Minsk, In-t problem nadezhnosti i dolgovechnosti mashin AN BSSR, 1987. 98 p.
  • Kosarev O.I. Vibrovozbuzhdenie i dinamicheskie processy v zubchatyh peredachah. Diss. dokt. tehn. nauk [Vibroexcitation and dynamic processes in gears. Dr. techn. sci. diss.]. Moscow, In-t mashinovedenija RAN, 1997. 47 p.
  • Biderman V.L. Teorija mehanicheskih kolebanij [Theory of mechanical vibrations]. Moscow, Vyssh. shk., 1980. 408 p.
  • GOST 213-4-87. Peredachi zubchatye cilindricheskie jevol'ventnye vneshnego zaceplenija. Raschet na prochnost [State Standard 213-4-87. Cylindrical gears involute of external engagement. Strength analysis].
  • Zhuk I.V., Ishin N.N., Skorohodov A.S., Schastnyj I.A. Sposob diagnostiki zubchatoj peredachi [Method of diagnosing of gear]. Author’s certificate no. 1612217, 1990, no. 45.
  • Berestnev O.V., Zhuk I.V., Nedel'kin A.N. Zubchatye peredachi s povyshennoj podatlivostju zubev [Gear teeth with increased sweating]. Minsk, Navuka i tjehnika, 1993. 183 p.
  • ISO 6336-1:2006 Calculation of load capacity of spur and helical gears. Part1: Basic principles, introduction and general factors of influence.
  • Moldovean G., Deaky B., Velicu R. The influence of some of the cylindrical gear parameters on the critical rotation. Transilvania University of Brasov. Annals of the Oradea University. Fascicle of Management and Technological Engineering, vol. VI(XVI), 2007, pp. 890-897.
  • Vulgakov Je.B. eds. Aviacionnye zubchatye peredachi i reduktory [Aircraft gears and gearboxes]. Moscow, Mashinostroenie, 1981. 374 p.