Smart Search 



Title of the article

APPLICATION OF GEARBOXES IN POWER DRIVES OF ELECTRIC VEHICLES

Authors

PODDUBKO Sergey N., Ph. D. in Eng., Assoc. Prof., Director General, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

ISHIN Nikolay N., D. Sc. in Eng., Assoc. Prof., Chief of the R&D Center “Mining Machinery”, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

GOMAN Arkadiy M., Ph. D. in Eng., Assoc. Prof., Head of the Department of Dynamic Analysis and Vibration-based Diagnostics of Machines, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

SKOROKHODOV Andrey S., Ph. D. in Eng., Leading Researcher of the Department of Dynamic Analysis and Vibration-based Diagnostics of Machines, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

SHABANOV Pavel A., Chief Designer for Automotive Technology – Head of the Chief Designer’s Department, JSC “Minsk Automobile Plant” – managing company of “BELAVTOMAZ” holding, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

In the section MECHANICS OF MOBILE MACHINES
Year 2020 Issue 3 Pages 5–11
Type of article RAR Index UDK 629.33; 621.3 Index BBK  
DOI https://doi.org/10.46864/1995-0470-2020-3-52-5-11
Abstract One of the disadvantages of electric vehicles is the limited driving range on a single charge, which depends significantly on the operating conditions. Until now, in electromechanical power units of transport vehicles, a single-stage gear reducer is most often used. An attempt to increase the driving range on a single charge of electric trucks due to an increase of the traction batteries capacity leads to a significant reduction in their load capacity. In this paper, the problem of improving the energy efficiency of electric vehicles is solved by using multistage gearboxes in power units. They make it possible to adapt the power unit to a joint operation in the high-efficiency zone of the traction electric motor and inverter, which ensures the energy consumption reduction of electric vehicles. An example of calculating the gear ratios of a two-stage gearbox for the experimental delivery electric truck MAZ-4381EE and different variants of the gearbox kinematic schemes are given. Furthermore, the use of а two-stage gearbox makes it possible to implement two parameters specified by the technical requirements that ensure the effective operation of the electric vehicle: the dynamic factor, characterizing its traction-speed properties, and the maximum speed.
Keywords

electric truck, driving range on a single charge, traction electric motor, gearbox, gear ratio

  You can access full text version of the article.
Bibliography
  1. Kharitonov S.A., Abasov E.I. Perspektivy ispolzovaniya korobok peredach v elektricheskikh transportnykh sredstvakh [Prospects for the use of gearboxes in electric vehicles]. Trudy NAMI, 2017, no. 2(269), pp. 101–106) (in Russ.).
  2. Ritari A., Vepsäläinen J., Kivekäs K., Tammi K., Laitinen H. Energy consumption and lifecycle cost analysis of electric city buses with multispeed gearboxes. Energies, 2020, vol. 13, no. 8. DOI: https://doi.org/10.3390/en13082117.
  3. Poddubko S.N., Ishin N.N., Goman A.M., Skorokhodov A.S., Natureva M.K. Obosnovanie parametrov silovoy ustanovki razvoznogo gruzovogo elektromobilya na baze shassi MAZ [Justification of parameters of the power unit of the delivery electric truck on the basis of MAZ chassis]. Aktualnye voprosy mashinovedeniya, 2018, iss. 7, pp. 230–236 (in Russ.).
  4. Vakhlamov V.K. Avtomobili: Ekspluatatsionnye svoystva [Automobiles: Operation properties]. Moscow, Akademiya Publ., 2006. 240 p. (in Russ.).
  5. Medinger C. What to consider when choosing an ac induction motor. Control Engineering Russia, 2018. Available at: https://www.controleng.com/articles/what-to-consider-when-choosing-an-ac-induction-motor/.
  6. Laitinen H. Improving electric vehicle energy efficiency with two-speed gearbox. Extended Abstract M. Sc. Thesis. Espoo, 2017. 59 p. Available at: https://aaltodoc.aalto.fi/bitstream/handle/123456789/27105/master_Laitinen_Heikki_2017.pdf (accessed 15 June 2020).
  7. Nissan LEAF dostupnyy nedorogoy elektromobil [Nissan LEAF affordable inexpensive electric car]. 2016. Available at: http://autotesla.ru/other-elektrokar/elektromobili-nissan/nissan-leaf-obzor-elektromobilya.html (accessed 15 June 2020) (in Russ.).
  8. Migal V.D. Tekhnicheskaya diagnostika avtomobiley. Tom 6: Diagnosticheskoe obespechenie tekhnicheskoy i ekologicheskoy bezopasnosti [Technical diagnostics of cars. Vol. 6: Diagnostic support for technical and environmental safety]. Kharkiv, Maydan Publ., 2012. 538 p. (in Russ.).
  9. Zlatin P.A., Kemenov V.A., Ksenevich I.P. Elektromobili i gibridnye avtomobili [Electric and hybrid vehicles]. Moscow, Agrokonsalt Publ., 2004. 416 p. (in Russ.).
  10. Brauer S. High speed electric vehicle transmission: Investigation how noise vibration harshness are affected at high speeds in an electric vehicle transmission. M. Sc. Thesis. Karlstad, 2017. 84 p. Available at: http://www.diva-portal.org/smash/get/diva2:1131147/FULLTEXT01.pdf (accessed 7 July 2020).
  11. Shumov Yu.N., Safonov A.S. Energosberegayushchie elektricheskie mashiny dlya privoda elektromobiley i gibridnykh avtomobiley (Obzor zarubezhnykh razrabotok) [Energy-saving electric machines for the drive of electric and hybrid vehicles (Review of foreign developments)]. Elektrichestvo, 2016, no. 1, pp. 55–65 (in Russ.).
  12. Wang Y., Lü E., Lu H., Zhang N., Zhou X. Comprehensive design and optimization of an electric vehicle powertrain equipped with a two-speed dual-clutch transmission. Advances in Mechanical Engineering, 2017, vol. 9, no. 1, pp. 1–13. DOI: https://doi.org/10.1177/1687814016683144.
  13. Li Y., Zhu B., Zhang N., Peng H., Chen Y. Parameters optimization of two-speed powertrain of electric vehicle based on genetic algorithm. Advances in Mechanical Engineering, 2020, vol. 12, no. 1, pp. 1–16. DOI: https://doi.org/10.1177/1687814020901652.
  14. Ruan J., Walker P., Zhang N. Comparison of power consumption efficiency of CVT and multi-speed transmissions for electric vehicle. International Journal of Automotive Engineering, 2018, vol. 9, no. 4, pp. 268–275. DOI: https://doi.org/10.20485/jsaeijae.9.4_268.
  15. State Standard R 52280-2004. Avtomobili gruzovye. Obshchie tekhnicheskie trebovaniya [Trucks. General technical requirements]. Moscow, Standartov Publ., 2005. 12 p. (in Russ.).
  16. Reshetov D.N. Detali mashin [Machine components]. Moscow, Mashinostroenie Publ., 1989. 496 p. (in Russ.).
  17. Xu X., Dong P., Liu Y., Zhang H. Progress in automotive transmission technology. Automotive Innovation, 2018, vol. 1, pp. 187–210. DOI: https://doi.org/10.1007/s42154-018-0031-y.