Title of the article

STRUCTURE AND MECHANICAL PROPERTIES OF CHAOTIC GLASS FIBER REINFORCED THERMOPLASTICS

Authors

Stavrov V.P., Belarusian State University of Technology, Minsk, the Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.

Narkevich A.L., Belarusian State University of Technology, Minsk, the Republic of Belarus

In the section MECHANICS OF COMPOSITES
Year 2008 Issue 1 Pages 66-70
Type of article RAR Index UDK 539.4:678.5 Index BBK  
Abstract

On the basis of statistical model of fibers orientation and damages growth the elastic modules and tensile strength of chaotic glass fiber reinforced thermoplastics are calculated.

Keywords

Thermoplastic, glass fiber, reinforce

   
Bibliography
  • Comprehensive composite materials. Vol. 2, Polymer matrix composites. Oxford, Elsevier, 2000. 759 p.
  • Henning F., Ernst H, Brussel, LFTs for automotive applications. Reinforced Plastics, 2005, Vol. 49, no. 2, pp. 24-33.
  • Stavrov V.P. Formoobrazovanie izdelij iz kompozicionnyh materialov [Shaping of articles made of composite materials]. Minsk: BGTU, 2006. 482 p.
  • Gibson R.F. Micromechanics. Composite Engineering Handbook. New York, M. Dekker Inc., 1997, pp. 167-202.
  • Bolotin V.V. Mehanika razrushenija kompozitov [Mechanics of composites destruction]. Kompozicionnye materialy: sprav. [Composite Materials: Handbook]. Moscow, Mashinostroenie Publ., 1990, pp. 158-188.
  • Gol'denblat I.I., Kopnov V.A. Prochnost' stekloplastikov pri slozhnom naprjazhennom sostojanii [The strength of fiberglass under complex stress state]. Mehanika polimerov [The mechanics of polymers], 1968, no. 2, pp. 70-78.

Title of the article

NUMERICAL MODELING OF A FLAME SURFACE IN THE CLOSED CHAMBER

Authors

Assad M.S., Institute of Heat and Mass Transfer named after A.V. Lykov, National Academy of Sciences of Belarus, Minsk, the Republic of Belarus

Mironov V.N., Institute of Heat and Mass Transfer named after A.V. Lykov, National Academy of Sciences of Belarus, Minsk, the Republic of Belarus

Penyazkov O.G., Institute of Heat and Mass Transfer named after A.V. Lykov, National Academy of Sciences of Belarus, Minsk, the Republic of Belarus

In the section MECHANICS OF LIQUIDS AND GASES
Year 2008 Issue 1 Pages 60-65
Type of article RAR Index UDK 536.46 : 533.6 : 621.4 Index BBK  
Abstract

The method for modeling of the flame surface in a closed cylindrical bomb is developed assuming preserving the spherical flame front at interactions with confined walls. Calculations are performed for ignition point located at the side and axial wall.
General expressions for flame surface taking into account the changing of flame shape and geometry of the bomb are deduced mathematically. Dependencies of the flame surface on time and flame radius are obtained. These expressions allow studying dynamic of heat release during combustion process.

Keywords

Flame surface, cylindrical bomb, flame radius

   
Bibliography
  • Assad M.S. [et al.]. Gorenie modificirovannyh topliv v modeli kamery sgoranija DVS [The burning of modified fuels in combustion chamber model of internal combustion engines]. Teplo- i massoperenos: sb. nauch. tr. In-ta teplo- i massoobmena im. A.V. Lykova NAN RB [Heat and Mass Transfer: Proceedings of the Institute of Heat and Mass Transfer named after A.V. Lykov. The NAS of the RB]. Minsk, 2005, pp. 100-105.
  • Assad M.S. [et al.]. Combustion of hydrogen-contained fuels in the model of ice chamber. International Workshop "Nonequilibrium processes in combustion and plasma based technologies", 2006, pp. 124-129.
  • Hitrin L.N. Fizika gorenija i vzryva [Combustion and explosion physics]. Moscow: MGU, 1957. 442 p.

Title of the article

LOCALIZED FORMS OF PARAMETRIC VIBRATIONS OF A CYLINDRICAL SHELL LAYING ON A NON-HOMOGENEOUS ELASTIC FOUNDATION

Authors

Mihasev G.I., Vitebsk State University, Vitebsk, Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.

In the section MECHANICS OF DEFORMED SOLIDS
Year 2008 Issue 1 Pages 53-56
Type of article RAR Index UDK 539.3:534.1 Index BBK  
Abstract

The problem on the parametric vibrations of a thin, long cylindrical shell lying on an elastic foundation under action of compressive static axial forces and pulsing pressure is considered. Under an assumption that a thickness and physical characteristics of the shell as well as a foundation factor of an elastic basis are functions of a longitudinal coordinate, solutions of the Flugge type equations are constructed in the form of functions decaying far from some parallel on the shell surface.

Keywords

Parametric vibrations, cylindrical shell, elastic foundation, static axial forces

   
Bibliography
  • Yao John C. Dynamic stability of cylindrical shells under static and periodic axial and radial loads. AIAA Journal, 1963, Vol. 1, no. 6, pp. 1391-1396.
  • Vijayaraghavan A., Evan-Iwanowski Parametric instability of circular cylindrical shells. Trans. ASME, 1967, Ed. 34, no. 4, pp. 985-990.
  • Mikhasev G.I. Free and parametric vibrations of cylindrical shells under static and periodic axial loads. Technische Mechanik [Technical mechanics], 1997, Vol.17, Part 3, pp. 209-216.
  • Kuntsevich S.P., Mikhasev G.I. Parametric Vibrations of Viscoelastic Cylindrical Shell under Static and Periodic Axial Loads. Technische Mechanik [Technical mechanics], 1999, Vol. 19, Part 3, pp. 187-195.
  • Kuntsevich S.P., Mikhasev G.I Lokal'nye parametricheskie kolebanija nekrugovoj konicheskoj obolochki pod dejstviem neodnorodnogo pul'sirujushhego davlenija [Local parametric vibrations of a non-circular conical shell under uniform pulsating pressure]. Izv. RAN. Mehanika tverdogo tela [Bulletin of the Academy of Sciences. Mechanics of solid body], 2002, no. 3. pp. 156-163.
  • Tovstik P.E. Dvumernye zadachi ustojchivosti i kolebanij obolochek nulevoj gaussovoj krivizny [Two-dimensional problems of stability and vibrations of shells of zero Gaussian curvature]. Dokl. AN SSSR [Report of the Academy of Sciences of the USSR], 1983, Vol. 271, no. 1, pp. 69-71.
  • Mihasev G.I. O vozmozhnyh lokalizovannyh formah sobstvennyh kolebanij dlinnyh predvaritel'no naprjazhennyh neodnorodnyh cilindricheskih obolochek [On the possible localized forms of natural oscillations of long prestressed nonuniform cylindrical shells]. Mezhved. sb. nauch.-metod. st. Bel. nac. tehn. un-t. [Interdepartmental collection of scientific and methodological articles. BNTU]. Minsk, 2006, Ed. 21, pp. 117-122.
  • Mihasev G.I. K issledovaniju izgibnyh voln v beskonechnoj obolochke vrashhenija [On the study of flexural waves in the endless rotation of the shell]. Prikl. mat. i meh. [Applied mathematics and mechanics], 1966, Vol. 32, no. 7. pp. 60-64.
  • Yao John C. Nonlinear elastic buckling and parametric excitation of a cylinder under axial loads. Trans. ASME, 1965, Ed. 32, no. 1, pp. 109-115.

Title of the article

DYNAMIC MODELING OF INNER PROCESSES IN PISTON (AXIAL) PUMP WITH FLUID FLOW REGULATION

Authors

Zhilevich M.I., Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, the Republic of Belarus

Shevchenko V.S., Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, the Republic of Belarus

In the section MECHANICS OF LIQUIDS AND GASES
Year 2008 Issue 1 Pages 57-59
Type of article RAR Index UDK 629.114+621.2 Index BBK  
Abstract

The model mathematics for estimation design parameters of piston (axial) pump with servosystem is proposed. The possibility of estimation influence parameters of pump and servosystem on dynamic features oft hydraulic drive.

Keywords

Piston pump, servosystem, dynamic features

   
Bibliography
  • Avtushko V.P. [et al.]. Gidropnevmoavtomatika i gidropnevmoprivod mobil'nyh mashin: Teorija sistem avtomaticheskogo upravlenija: ucheb. Posobie [Hydropneumatic automation and hydro pneumatic drive of mobile machines: Theory of automatic control systems: Textbook]. Minsk, NP OOO "PION" Publ., 2001. 396 p.
  • Popov D.N. Dinamika i regulirovanie gidro- i pnevmosistem: ucheb. dlja vuzov [Dynamics and regulation of hydraulic and pneumatic systems: a textbook for high schools]. Moscow, Mashinostroenie Publ., 1987. 464 p.
  • Bogdan N.V., Avtushko V.P., Zhilevich M.I. Modelirovanie i raschet dinamiki gidroprivodov [Simulation and calculation of hydraulic drives dynamics]. Ves. Nac. akad. navuk Belarusi. Ser. fiz.-tjehn. Navuk [Bulletin of NAS of Belarus. Ser. Physics and Technical. sciences], 2003, no. 3, pp. 87-94.
  • Frolov K.V. [et al.]. Kolebanija jelementov aksial'no-porshnevyh gidromashin [Fluctuations elements of axial-piston hydraulic machines]. Moscow, Mashinostroenie Publ., 1973. 280 p.

Title of the article

ON THE MOVEMENT OF A RIGID BODY WITH A RING SUPPORT AREA ALONG A ROUGH PLANE

Authors

Argatov I.I., Institute of Problems of Mechanical Engineering, St. Petersburg, Russia

In the section MECHANICS OF DEFORMED SOLIDS
Year 2008 Issue 1 Pages 49-52
Type of article RAR Index UDK 531.2 Index BBK  
Abstract

Equations of plane-parallel sliding of a rigid body with the ring support under dry friction are derived. For the time of braking of a nonhomogeneous ring, we obtain a two-sided estimate which coincides with the "unimproved" estimate in the limit case of the narrow ring. As an example, the problem of braking of a system of two nearly situated narrow rings is considered.

Keywords

Dry friction, rigid body

   
Bibliography
  • Lur'e A.I. Analiticheskaja mehanika [Analytical mechanics]. Moskow: GIFML, 1961. 824 p.
  • Ishlinskij A.Ju., Sokolov B.N., Chernous'ko F.L. O dvizhenii ploskih tel pri nalichii suhogo trenija [On the motion of flat bodies in the presence of dry friction]. Izv. AN SSSR. Meh. tverd. tela [Bulletin of the Academy of Sciences of the USSR. Mechanics of solid body], 1981, no. 4, pp.17-28.
  • Dmitriev N.N. O dvizhenii ploskih tel po poverhnosti s suhim anizotropnym treniem [On the motion of flat bodies on a surface with dry anisotropic friction]. Dep. v VINITI [Dep. VINITI]. Leningrad, 1988. 22 p.
  • Argatov I.I. Uslovija ravnovesija tverdogo tela na sherohovatoj ploskosti pri osesimmetrichnom raspredelenii normal'nyh davlenij [Solid-state equilibrium conditions on the rough surface with an axially symmetric distribution of normal pressure]. Izv. RAN. Meh. tverd. tela [Bulletin of the Academy of Sciences. Mechanics of solid body], 2005, no. 2, pp. 15-26.
  • Rozenblat G.M. Dinamicheskie sistemy s treniem [Dynamic systems with friction]. Reguljarnaja i haoticheskaja dinamika [Regular and chaotic dynamics]. Moskow; Izhevsk, 2005. 156 p.
  • Gradshtejn I.S., Ryzhik I.M Tablicy integralov, summ, rjadov i proizvedenij [Tables of integrals, sums, series and products]. Moskow: Fiz-matgiz, 1963. 1100 p.
  • Kontensu P. Svjaz' mezhdu treniem skol'zhenija i treniem verchenija i ejo uchet v teorii volchka [The connection between the sliding friction and friction spinning and its accounting in the theory of spinner]. Problemy giroskopii [Gyroscopy problems]. Moskow, Mir, 1967, pp. 60-77.
  • Zhuravlev V.F. O modeli suhogo trenija v zadache kachenija tverdyh tel [On a model of dry friction in the problem of rolling solids]. Prikl. matem. i meh. [Applied mathematics and mechanics], 1998, Vol. 62, Ed. 5, pp. 762-767.
  • Kireenkov A.A. O dvizhenii odnorodnogo vrashhajushhegosja diska po ploskosti v uslovijah kombinirovannogo trenija [On the motion of a homogeneous rotating disk on the plane in a combination of friction]. Izv. RAN. Meh. tverd. tela [Bulletin of the Academy of Sciences. Mechanics of solid body], 2002, no. 1, pp. 60-67.
  • Samsonov V.A. O trenii pri skol'zhenii i verchenii tela [On the friction during sliding and rotation of the body]. Vestn. MGU [Bulletin of MGU]. Ser.1, 1981, no. 2, pp. 76-78.