Title of the article

TENDENCIES OF THE DEVELOPMENT OF MECHANICS OF MACHINES AND MECHANISMS – 2019: WORLD TRENDS AND OUTPUTS OF THE 15th IFToMM WORLD CONGRESS

Authors

ALGIN Vladimir B., D. Sc. in Eng., Prof., Deputy Chief of the R&D Center “Mining Machinery”, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

PODDUBKO Sergey N., Ph. D. in Eng., Assoc. Prof., Director General, Joint Institute of Mechanical Engineering of the NAS of Belarus, Minsk, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

STARZHINSKY Viktor E., D. Sc. in Eng., Prof., Chief Researcher, V.A. Belyi Metal-Polymer Research Institute of the NAS of Belarus, Gomel, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

SHIL’KO Sergey V., Head of the Laboratory of Mechanics of Composites and Biopolymers, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

In the section GENERAL ISSUES OF MECHANICS
Year 2019 Issue 4 Pages 5–19
Type of article RAR Index UDK 531.8:621.01 Index BBK  
Abstract

The paper is a journal version of the plenary report at the VIII Belarusian Congress on Theoretical and Applied Mechanics “Mechanics-2019”, which was held in Minsk, Belarus, on September 18–20, 2019. The world challenges are described: aging of the population, ecological and energy problems. Technological advances smooth out these problems to a certain extent. One of the main factors in solving global problems is digitalization and the Industry 4.0 initiative, closely related to it. In this initiative, the model approach and the digital twin that are largely developed in mechanics play a central role. The main approaches to the creation of digital twins are highlighted and characterized. On the example of gears and transmissions, the features of the approach to the formation of digital twins for non-standard technically complicated items are shown. Information is given on IFToMM — the most influential world public organization in the field of technical sciences, Proceedings of the IFToMM-2019 Congress, held in Krakow (Poland) from June 30 to July 4, 2019, and the events of the Congress. The materials of the article contain examples and generalizations on the most modern scientific areas, allowing to get acquainted with them, first of all, to domestic specialists, to correlate with them the directions and level of your own research.

Keywords

world challenges and trends, mechanics of machines and mechanisms, energy efficiency, digitalization, digital twins, IFToMM Congress-2019

   
Bibliography
  1. Farrell J. The Environment, The Economy, & Equity. Available at: https://cleantechnica.com/2019/09/03/the-environment-theeconomy- equity/?utm_source=CleanTechnica+News&utm_ campaign=ce8dc983d4-Da%E2%80%A6 (accessed 17 October 2019).
  2. Tesla Gigafactory. Available at: https://www.tesla.com/sites/default/ files/blog_attachments/gigafactory.pdf (accessed 21 October 2019).
  3. Khel I. Industriya 4.0: chto takoe chetvertaya promyshlennaya revolyutsiya? [Industry 4.0: What is the Fourth Industrial Revolution?]. 2015. Available at: https://hi-news.ru/ business-analitics/industriya-4-0-chto-takoe-chetvertayapromyshlennaya- revolyuciya.html (accessed 17 October 2019).
  4. Bagheri B., Lee J. Big future for cyber-physical manufacturing systems. 2015. Available at: https://www.designworldonline. com/big-future-for-cyber-physical-manufacturing-systems/ (accessed 17 October 2019).
  5. Algin V.B., Ishin N.N., Starzhinsky V.E., Shil’ko S.V., Rackov M., Čavić M. Development of digital twins for gears and transmissions based on lifetime mechanics and composite mechanics. Aktualnye voprosy mashinovedeniya [Topical issues of mechanical engineering], 2019, iss. 8, pp. 172–184.
  6. Tao F., Cheng J., Qi Q., Zhang M., Zhang H., Sui F. Digital Twin-driven Product Design, Manufacturing and Service with Big Data. International Journal of Advanced Manufacturing Technology, 2018, vol. 94, iss. 9–12, pp. 3563–3576.
  7. Tao F., Sui F., Liu A., Qi Q., Zhang M., Song B., Guo Z., Lu S.C.-Y., Nee A.Y.C. Digital twin-driven product design framework. International Journal of Production Research, 2019, vol. 57, no. 12, pp. 3935–3953.
  8. Van der Auweraer H. Connecting physics based and data driven models: The best of two worlds. 2018. Available at: https:// www.ima.umn.edu/materials/2017-2018/SW3.6-8.18/26842/ IMA_2018_Van_der_Auweraer.pdf (accessed 15 October 2019).
  9. Stahl K. Foreword “Best of Gears 2019”. Forschung im Ingenieurwesen, 2019, vol. 83, iss. 3, pp. 325–326.
  10. Keuthen M. REXS — Standardized Gear Unit Model. Proc. International Conference on Gears 2019. Garching/Munich, 2019, pp. 701—712.
  11. Grinberg A.S., Algin V.B. Informatsionnye modeli i resursy mashin [Information models and resources of machines]. Materialy mezhdunarodnoy nauchnoy konferentsii “Mekhanika mashin na poroge III tysyacheletiya” [Proc. International Scientific Conference “Mechanics of Machines on the Threshold of the Third Millennium”]. Minsk, 2001, pp. 272–281.
  12. Ershov A. Ob informatsionnoy modeli mashiny [On the information model of the machine]. Mikroprotsessornye sredstva i sistemy [Microprocessor means and systems], 1985, no. 4, p. 2.
  13. Algin V.B., Ishin N.N. Nadezhnost tekhnicheski slozhnykh izdeliy v svete “Industrii 4.0” [Reliability of technically complicated items in terms of “Industry 4.0”]. Aktualnye voprosy mashinovedeniya [Topical issues of mechanical engineering], 2017, iss. 6, pp. 43–54.
  14. Standard of Belarus 2465-2016. Nadezhnost v tekhnike. Menedzhment nadezhnosti tekhnicheski slozhnykh izdeliy [Reliability in Technics. Reliability Management of Technically Complicated Items]. Minsk, Gosstandart Publ., Gosudarstvennyy komitet po standartizatsii Respubliki Belarus Publ., 2017. 24 p.
  15. Standard of Belarus 2466-2016. Nadezhnost v tekhnike. Raschet nadezhnosti tekhnicheski slozhnykh izdeliy [Reliability in Technics. Reliability Calculation of Technically Complicated Items]. Minsk, Gosstandart Publ., Gosudarstvennyy komitet po standartizatsii Respubliki Belarus Publ., 2017. 20 p.
  16. Lefebvre V.A. Konfliktuyushchie struktury [Conflicting structures]. Moscow, Sovetskoe radio Publ., 1973. 160 p.
  17. Algin V.B., Poddubko S.N. Resursnaya mekhanika transmissiy mobilnykh mashin [Lifetime mechanics of vehicle transmissions]. Minsk, Belaruskaya Navuka Publ., 2019. 549 p.
  18. Algin V.B., et al. Zubchatye peredachi i transmissii v Belarusi: proektirovanie tekhnologiya, otsenka svoystv [Gears and transmissions in Belarus: design, technology, estimation of properties]. Minsk, Belaruskaya Navuka Publ., 2017. 406 p.
  19. Shil’ko S.V., Starzhinsky V.E., Petrokovets E.M. Methods and Results of Composite Gears Design. Theory and Practice of Gearing and Transmissions, 2016, pp. 341–368.
  20. Demidov G.A., Karandashev A.N., Shalobaev E.V., Perepelitsa F.A., Shil’ko S.V., Starzhinsky V.E., Dubrovsky V.V. Primenenie polimernykh svyazuyushchikh pri sozdanii keramicheskikh izdeliy metodami additivnykh tekhnologiy [The use of polymer binders in the creation of ceramic products by the methods of additive technologies]. Polimernye materialy i tekhnologii [Polymer materials and technologies], 2019, vol. 5, no. 3, pp. 59–63.
  21. Ceccarelli M. Consideration on History of Mechanism and Machine Science with an IFToMM Role for Future Development. Theory and Practice of Gearing and Transmissions, 2016, pp. 37–54.
  22. Advances in Mechanism and Machine Science. Proceedings of the 15th IFToMM World Congress on Mechanism and Machine Science. Krakow, Poland, 2019. 4248 p.
  23. Venkateswaran S., Chablat D. A new inspection robot for pipelines with bends and junctions. Advances in Mechanism and Machine Science, 2019, pp. 33–42.
  24. Babichev D., Evgrafov A., Lebedev S. Lever mechanisms: the new approach to structural synthesis and kinematic analysis. Advances in Mechanism and Machine Science, 2019, pp. 559–568.
  25. Parikyan T. Design Analysis Tasks in Simulation of Engine and Powertrain Dynamics: An Overview. Advances in Mechanism and Machine Science, 2019, pp. 893–904.
  26. Chandra M., Dan P.K. A Novel Gear Shifting Strategy for Dual Clutch Transmission System Using Reverse Engineering and Robust Design Technique. Advances in Mechanism and Machine Science, 2019, pp. 1049–1058.
  27. Simionescu P.A. New and Revised Mechanism Classifications: Proposal and Motivation. Advances in Mechanism and Machine Science, 2019, pp. 1141–1150.
  28. Li H., Li R., Zhu J. Design and Experiment of the Underwater Robotic Fish for Petroleum Pipeline Inspection System. Advances in Mechanism and Machine Science, 2019, pp. 1373–1384.
  29. Pozhbelko V. Type Synthesis Method of Planar and Spherical Mechanisms Using the Universal Structural Table with All Possible Link Assortments. Advances in Mechanism and Machine Science, 2019, pp. 1517–1526.
  30. Pozhbelko V.I. Mnogokratnyy sharnir peredachi [Multiple articulated joint of gear]. Patent RF, no. 2543135, 2015.
  31. Demiyanushko I., Karpov I., Tavshavadze B. Applications Fem Analysis in Researches Reliability and Dynamics of Road Safety Barriers at Collisions with Cars. Advances in Mechanism and Machine Science, 2019, pp. 1651–1658.
  32. Guo Z., Zhu Y., Wang M., Li T., Zhao H., Xu L., Ceccarelli M. System Design and Experimental Analysis of an Allenvironment Mobile Robot. Advances in Mechanism and Machine Science, 2019, pp. 1969–1978.
  33. Zieliński C. General Robotic System Software Design Methodology. Advances in Mechanism and Machine Science, 2019, pp. 2779–2788.
  34. Pencic M., Cavic M., Brkic B., Rackov M. A Novel 3 DOFs Waist Mechanism for Humanoid Robots: Kinematic Analysis and Motion Simulation. Advances in Mechanism and Machine Science, 2019, pp. 2809–2818.
  35. D. Pandey, Kushwah J.S., Chittawadigi R.G., Krishna K.R., Saha S.K. Effective Teaching of Mechanism Synthesis using MechAnalyzer Software. Advances in Mechanism and Machine Science, 2019, pp. 3237–3245.
  36. Quaglia G., Visconte C., Scimmi L.S., Melchiorre M., Cavallone P., Pastorelli S. Design of the positioning mechanism of an unmanned ground vehicle for precision agriculture. Advances in Mechanism and Machine Science, 2019, pp. 3531–3540.
  37. Raghavan M. Novel Mechanisms to Improve the Start Quality of Automotive Engines. Advances in Mechanism and Machine Science, 2019, pp. 3591–3600.
  38. Algin V. Calculated Modes for Assessing Operation Properties and Dependability of Vehicles. Advances in Mechanism and Machine Science, 2019, pp. 3749–3758.
  39. Myshkin N.K., Grigoriev A.Ya. Problems in Friction Analysis. Advances in Mechanism and Machine Science, 2019, pp. 3779–3788.