Title of the article

THE THEORETICAL ANALYSIS OF THE PROCESS OF INDUCTION CENTRIFUGAL WELD DEPOSITION OF COATINGS WITH NANOSIZED MODIFIERS

Authors

BELOTSERKOVSKY Marat A., Dr. Techn. Sc., Associate Professor, Head of the Laboratory of Gas-Thermal Methods of Hardening of Machine Part, Joint Institute of Mechanical Engineering of the National Academy of Sciences of Belarus, Minsk, Republic of Belarus, E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

KURILYONOK Artem A., Junior Researcher, Joint Institute of Mechanical Engineering of the National Academy of Sciences of Belarus, Minsk, Republic of Belarus

SOSNOVSKIY Igor A., Senior Researcher, Joint Institute of Mechanical Engineering of the National Academy of Sciences of Belarus, Minsk, Republic of Belarus, E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

In the section TECHNOLOGICAL MECHANICS
Year 2016 Issue 2 Pages 68-74
Type of article RAR Index UDK 621.793 Index BBK  
Abstract

The mathematical model of the processes of induction weld deposition of powder materials in the initial state of dispersionpowder medium and containing the strengthening phase particles represented by ultrafine or nanosized inclusions of refractory oxides or carbides is developed. The results of the modeling of the contact gaps formation between the particles of the dispersed phase in the elastic compression and the impact of this period on the type of transition of dispersionpowder medium into solid state are described. The methods of implementation of nanosized additives in the coating structure are proposed. The developed model allows the calculation of weld deposition process modes with account for the dispersionpowder materials characteristics and centrifugal forces influence.

Keywords

powder charge, antifriction coatings, centrifugal induction weld deposition, nanosized components, mathematical model

  You can access full text version of the article.
Bibliography
  • Frolov K.V. Sovremennaja tribologija: Itogi i perspektivy [Modern tribology: Results and Prospects]. Moscow, Izdatel’stvo LKI, 2008. 480 p.
  • Garkunov D.A. Tribotehnika (iznos i bezyznosnost’) [Tribotechnology (wear and wearlessness)]. Moscow, MSHA, 2001. 616 p.
  • Fedorchenko I.M., Putina L.I. Kompozicionnye spechennye antifrikcionnye materialy [Composite sintered antifriction materials]. Kiev, Naukova dumka, 1980. 404 p.
  • Li R.I. Tehnologija vosstanovlenija i uprochnenija detalej avtotraktornoj tehniki [Technology of restoration and hardening of details of automotive engineering]. Lipetsk, LGTU, 2014. 379 p.
  • Gladkiy P.V., Perepletchikov E.F., Rjabcev I.A. Plazmennaja tehnologija [Plasma technology]. Kiev, Jekotehnologija, 2007. 292 p.
  • Frumin, I.I. Avtomaticheskaja jelektrodugovaja naplavka [Automatic arc welding]. Moscow, Metallurgija, 1961, 424 p.
  • Kostikov V.I., Shesterin Ju.A. Plazmennye pokrytija [Plasma coatings]. Moscow, Metallurgija, 1978. 160 p.
  • Tkachev V.N. [et al.]. Indukcionnaja naplavka tverdyh splavov [The induction hardfacing]. Moscow, Metallurgija, 1970. 183 p.
  • Klimenko Ju.V., Karakozva Je.S. Jelektrokontaktnaja naplavka [Electric-contact building-up welding]. Moscow, Metallurgija, 1978. 128 p.
  • Dorozhkin N.N., Abramovich T.M., Zhornik V.I. Poluchenie pokrytij metodom pripekanija [Coating-making with sintering]. Minsk, Nauka i tehnika, 1980. 176 p.
  • Dorozhkin N.N. Jelektrofizicheskie metody nanesenija metallicheskih pokrytij iz metallicheskih poroshkov [Electrophysical methods of metal powders application]. Riga, Zinatne, 1985. 131 p.
  • Dorozhkin N.N. [et al.]. Centrobezhnoe pripekanie poroshkovyh pokrytij pri peremennyh silovyh vozdejstvija [The centrifugal sintering of powder coatings with variable impact power]. Minsk, Navuka I tjehnika, 1993. 159 p.
  • Belyavin K.E. [et al.]. Impul’snye jelektrofizicheskie tehnologii poluchenija pokrytij i modificirovanija poverhnosti materialov [Pulsed electrical technology for coatings and surface modification of materials]. Trudy Metallurgija [Proc. of Metallurgy], 2013, no. 34, pp. 58-71.
  • Belyavin K.E., Sosnovski I.A., Hudoley A.L. Indukcionnyj nagrev v processah centrobezhnogo nanesenija pokrytij [Induction heating processes centrifugal coating]. Vestnik fonda fundamental’nyh issledovanij [The bulletin of fundamental research fund], Minsk, 2013, no. 3(36), pp. 70-87.
  • Grigoryanc A.G. Osnovy lazernoj obrabotki materialov [Fundamentals of laser materials processing]. Moscow, Mashinostroenie, 1989. 304 p.
  • Komarov A.I., Klubovich V.V. Sintez nanostrukturirovannyh tugoplavkih napolnitelej, ih vlijanie na strukturu i svojstva siluminov [Synthesis of nanostructured refractory fillers, their influence on the structure and properties of silumin]. Perspektivnye tehnologii [Advanced technologies], Vitebsk, 2015, vol. 2, pp. 202-223.
  • Vityaz P.A. [et al.].Sozdanie nanostrukturirovannyh kompozicionnyh modifikatorov dlja splavov aljuminija [Creation of nanostructured composite modifiers for aluminum]. Dokl. NAN Belarusi [NASB reports], 2011, no. 5(55), pp. 91-96.
  • Balshin M.Ju., Kiparisov S.S. Osnovy poroshkovoj metallurgii [Fundamentals of powder metallurgy]. Moscow, Metallurgija, 1978. 184 p.
  • Matrenin S.V., Slosman A.I. Tehnicheskaja keramika [Technical ceramics]. Tomsk, Izd-vo TPU, 2004. 75 p.
  • Miheev R.S., Chernyshova T.A. Aljumomatrichnye kompozicionnye materialy s karbidnym uprochneniem dlja reshenija zadach novoj tehniki [Aluminium matrix composite materials with carbide hardening to meet challenges of emerging technologies]. Moscow, Maska, 2013. 356 p.
  • Tolbanova L.O. Metody poluchenija nanomaterialov: kurs lekcij [Methods for producing nanomaterials: lectures]. Tomsk, Nacional’nyj issledovatel’skij Tomskij politehnicheskij universitet, 2010. 79 p.
  • Cherepanov A.N. [et al.]. Primenenie ul’tradispersnyh poroshkov dlja uluchshenija svojstv metallov i splavov [The use of ultrafine powders to improve the properties of metals and composites]. Materialovedenie [Materials science], 2000, no. 10, pp. 45-53.
  • Kalinina A.P. Strukturoobrazovanie pri ohlazhdenii zhidkih metallov, soderzhashhih ul’tradispersnye chasticy [Structure formation during cooling of liquid metals, containing ultrafine particles]. Novosibirsk, NGU, 1999. 105 p.
  • Al’mjasheva O.V. [et al.]. Poluchenie nanokristallov oksida aljuminija v gidrotermal’nyh uslovijah [Preparation of aluminium oxide at hydrothermal conditions]. Neorganicheskie materialy [Inorganic materials], 2005, no. 5, pp. 1-8.
  • Ivanova A.S. Oksid aljuminija: primenenie, sposoby poluchenija, struktura i kislotno-osnovnye svojstva [Aluminium oxide: usage, methods of preparation, structure and properties of the acid-base]. Promyshlennyj kataliz v lekcijah [Industrial catalysis in lectures], 2008, no. 8, pp. 7-61.
  • Ochinskiy, V.N., Nasekan Ju.P. Poluchenie metallurgicheskogo glinozema pod davleniem para pri temperaturah nizhe 1000 °C [Preparation of metallurgical alumina under a pressure at temperatures below 1000 &#176 C]. Metallurgija [Metallurgy], 2012, no.7, pp. 26-33.
  • Sluhockiy A.E., Ryskin S.E. Induktory dlja indukcionnogo nagreva [Inductors for induction heating]. Leningrad, Jenergija, 1974. 264 p.
  • Grebenyuk V.F., Homutov V.I., Kalmykov E.V. Vybor konfiguracii i raschet induktora dlja vysokochastotnogo nagreva: metodicheskie ukazanija k kursovomu i diplomnomu proektirovaniju [Configuring and inductor calculation for high-frequency heating: methodical instructions to course and degree engineering]. Orenburg, GOU VPO OGU, 2002. 31 p.
  • Koryagin Ju.D., Filatov V.I. Indukcionnaja zakalka stalej: ucheb. posobie [Induction steel hardening]. Chelyabinsk: Izd-vo JuUrGU, 2006. 52 p.