Title of the article

NONLINEAR DEFORMATION OF CIRCULAR SANDWICH PLATES WITH COMPRESSIBLE FILLER

Authors

STAROVOITOV Eduard I., D. Sc. in Phys. and Math., Prof., Head of the Department “Structural Mechanics”, Belarusian State University of Transport, Gomel, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

ZAKHARCHUK Yuliya V., Ph. D. in Phys. and Math., Senior Lecturer of the Department “Building technologies and constructions”, Belarusian State University of Transport, Gomel, Republic of Belarus, This email address is being protected from spambots. You need JavaScript enabled to view it.">This email address is being protected from spambots. You need JavaScript enabled to view it.

In the section MECHANICS OF DEFORMED SOLIDS
Year 2019 Issue 3 Pages 26–33
Type of article RAR Index UDK 539.3 Index BBK  
Abstract

Here is the formulation of the boundary value problem on the bending of an elastoplastic three-layer circular plate with a compressible filler. To describe the kinematics of the package, the hypotheses of the polyline are accepted. For thin bearing layers, the Kirchhoff hypothesis is accepted. In a relatively thick lightweight filler, the Tymoshenko hypothesis is performed with a linear approximation of radial displacements and deflection along the layer thickness. The work of shear stresses and compression stresses is assumed to be small and is not taken into account. The physical equations of state in the bearing layers correspond to the nonlinear theory of elasticity. The inhomogeneous system of ordinary nonlinear differential equations of equilibrium is obtained by the Lagrange variational method. Boundary conditions are formulated. The solution of the boundary value problem is reduced to finding the four desired functions – the deflection of the lower layer; shear, radial displacement and compression function in the filler. These functions satisfy an inhomogeneous system of ordinary nonlinear differential equations. Here is the formulation of the boundary value problem on the bending of an elastoplastic three-layer circular plate with a compressible filler. To describe the kinematics of the package, the hypotheses of the polyline are accepted. For thin bearing layers, the Kirchhoff hypothesis is accepted. In a relatively thick lightweight filler, the Tymoshenko hypothesis is performed with a linear approximation of radial displacements and deflection along the layer thickness. The work of shear stresses and compression stresses is assumed to be small and is not taken into account. The physical equations of state in the bearing layers correspond to the nonlinear theory of elasticity. The inhomogeneous system of ordinary nonlinear differential equations of equilibrium is obtained by the Lagrange variational method. Boundary conditions are formulated. The solution of the boundary value problem is reduced to finding the four desired functions – the deflection of the lower layer; shear, radial displacement and compression function in the filler. These functions satisfy an inhomogeneous system of ordinary nonlinear differential equations.

Keywords

nonlinear elasticity, three-layer circular plate, compressible filler, deformation

   
Bibliography
  1. Golovko K.G., Lugovoy P.Z., Meysh V.F. Dinamika neodnorodnykh obolochek pri nestatsionarnykh nagruzkakh [The dynamics of inhomogeneous shells under transient load conditions]. Kiev, Kievskiy universitet Publ., 2012. 541 p.
  2. Ivañez I., Moure M.M., Garcia-Castillo S.K., Sanchez-Saez  S. The oblique impact response of composite sandwich plates. Composite Structures, 2015, no. 133, pp. 1127–1136.
  3. Grover N., Singh B.N., Maiti D.K. An inverse trigonometric shear deformation theory for supersonic flutter characteristics of multilayered composite plates. Aerospace Science and Technology, 2016, no. 52, pp. 41–51.
  4. Starovoitov E.I., Leonenko D.V., Yarovaya A.V. Vibrations of round three-layer plates under the action of various types of surface loads. Strength of Materials, 2003, vol. 35, no. 4, pp.   346–352.
  5. Starovoitov E.I., Leonenko D.V. Resonant effects of local loads on circular sandwich plates on an elastic foundation. International Applied Mechanics, 2010, vol. 46, no. 1, pp. 86–93.
  6. Paimushin V.N., Ivanov V.I., Khusainov V.R. Analiz svobodnykh i sobstvennykh kolebaniy trekhsloynoy plastiny na osnove uravneniy utochnennoy teorii [Study of free and eigen vibrations of a three-layer plate on the bases of equations of a refined theory]. Mekhanika kompozitsionnykh materialov i  konstruktsiy [Mechanics of composite materials and structures], 2002, vol. 8, no. 4, pp. 543–554.
  7. Starovoitov E.I., Leonenko D.V., Pleskatshevsky Yu.M. Kolebaniya trekhsloynykh tsilindricheskikh obolochek v uprugoy srede Vinklera pri rezonanse [Vibrations of the three-layered cylindrical shells in the elastic winkler’s medium at resonance]. Mekhanika mashin, mekhanizmov i materialov [Mechanics of machines, mechanisms and materials], 2013, no. 4(22), pp. 70–73.
  8. Dzhagangirov A.A. Nesushchaya sposobnost trekhsloynoy voloknistoy kompozitnoy koltsevoy plastinki, zashchemlennoy po kromkam [Carrying capacity of a three-layer fibrous composite annular plate, clamped along the edges]. Mekhanika kompozitnykh materialov [Mechanics of composite materials], 2015, vol. 51, no. 2, pp. 100–109.
  9. Gorshkov A.G., Starovoitov E.I., Yarovaya A.V. Mekhanika sloistykh vyazkouprugoplasticheskikh elementov konstruktsiy [Mechanics of layered viscoelastic structural elements]. Moscow, FIZMATLIT Publ., 2005. 576 p.
  10. Starovoitov E.I. O peremennom nagruzhenii vyazkoplasticheskikh trekhsloynykh pologikh obolochek [On variable loading of viscoplastic three-layered shallow shells]. Vestnik Moskovskogo universiteta. Seriya 1: Matematika. Mekhanika [Bulletin of Moscow University. Series 1: Mathematics. Mechanics], 1980, no. 2, pp. 92–96.
  11. Moskvitin V.V., Starovoitov E.I. Deformatsiya i peremennye nagruzheniya dvukhsloynykh metallopolimernykh plastin [Deformation and variable loading of two-layer metal-polymer plates]. Mekhanika kompozitnykh materialov [Mechanics of composite materials], 1985, vol. 21, no. 3, pp. 267–273.
  12. Gorshkov A.G., Starovoitov E.I., Yarovaya A.V. Tsiklicheskie nagruzheniya uprugoplasticheskikh tel v neytronnom potoke [Cyclic loading of elastic-plastic bodies in neutron flux]. Izvestiya RAN. Mekhanika tverdogo tela [News of RAS. Mechanics of solids], 2001, vol. 36, no. 1, pp. 64–70.
  13. Škec L., Jelenić G. Analysis of a geometrically exact multi-layer beam with a rigid interlayer connection. Acta Mechanica, 2014, vol. 225, no. 2, pp. 523–541.
  14. Yang L., Harrysson O., West H., Cormier D.A. Comparison of Bending Properties for Cellular Core Sandwich Panels. Materials Sciences and Applications, 2013, vol. 4, no. 8, pp. 471–477.
  15. Lee C. R., Sun S. J., Каm Т. Y. System parameters evaluation of flexibly supported laminated composite sandwich plates. AIAA Journal, 2007, vol. 45, no. 9, pp. 2312–2322.
  16. Zenkour A.M., Alghamdi N.A. Bending Analysis of Functionally Graded Sandwich Plates under the Effect of Mechanical and Thermal Loads. Mechanics of Advanced Materials and Structures, 2010, vol. 17, no. 6, pp. 419–432.
  17. Zhuravkov M.A., Starovoitov E.I., Leonenko D.V. Nelineynoe deformirovanie uprugoplasticheskogo trekhsloynogo sterzhnya lokalnoy nagruzkoy [The second deformation of the three-layer elastoplastic rod by local load]. Mekhanika ma-
    shin, mekhanizmov i materialov
    [Mechanics of machines, mechanisms and materials], 2016, no. 3(36), pp. 71–79.
  18. Starovoitov E.I., Leonenko D.V. Thermoelastic bending of a sandwich ring plate on an elastic foundation. International Applied Mechanics, 2008, vol. 44, no. 9, pp. 1032–1040.
  19. Starovoitov E.I., Leonenko D.V. Deformirovanie trekhsloynogo sterzhnya v temperaturnom pole [Deformation of three-layer beam in a temperature field]. Mekhanika mashin, mekhanizmov i materialov [Mechanics of machines, mechanisms and ma terials], 2013, no. 1(6), pp. 31–35.
  20. Starovoitov E.I., Leonenko D.V. Termouprugoe deformirovanie trekhsloynoy krugloy plastiny poverkhnostnymi nagruzkami razlichnykh form [Thermoelastic deformation of three-layer circular plate by a surface loads of various forms]. Mekhanika mashin, mekhanizmov i materialov [Mechanics of machines, mechanisms and materials], 2018, no. 1(42), pp. 81–88.
  21. Zakharchuk Yu.V. Deformirovanie krugovoy trekhsloynoy plastiny so szhimaemym zapolnitelem [Deformation of the circular three-layer plate with a compressible filler]. Problemy fiziki, matematiki i tekhniki [Problems of physics, mathematics and technics], 2017, vol. 33, no. 4, pp. 53–57.
  22. Starovoitov E.I., Zakharchuk Yu.V. Izgib krugovoy trekhsloynoy plastiny s legkim szhimaemym zapolnitelem [Bending of circular three-layer plate with easy compressible filler]. Problemy mashinostroeniya i avtomatizatsii [Engineering and automation problems], 2018, no. 4, pp. 88–97.
  23. Starovoitov E.I. K opisaniyu termomekhanicheskikh svoystv nekotorykh konstruktsionnykh materialov [To the description of thermomechanical properties of some structural materials]. Problemy prochnosti [Strength of materials], 1988, no. 4, pp. 11–15.